System

Purpose

Pro.Monior allows administrators to fully configure a system with an specific functionality : System. This feature is subdivided in the following sections (see image below) :

System Setting

In this section, administrators can configure :

How many parallel tasks a given monitoring process will execute.

The allocation (in GB) of the monitoring processes memory.

Monitoring processes' timeout (in minutes)

Retention setting

Under this section, administrators are able to :

Activate / Deactivate the Moniors result Retention Pro.Monitor feature

Set the number of days that Pro.Monitor will store in memory monitoring test information

Set the number of days that Pro.Monitor will keep in memory the monitoring data

Configure the number of days Pro.Monitor log files will write information

Timeout setting

In this section, administrators will be able to :

Set the timeout value (in seconds) for a report to be generated

Configure the maximum connection invalid attempt time

Set the maximum connection response time (in seconds)

Launch the “Cleanup Procedure”, which will immediately clean all information stored as Tests, Monitor results and Log files retention.

Flapping settings

Under this section, the administrator can determine :

When a given system is to be considered as a “flapping system” trough the folllowing parameters :

Period : It represents the time lapse (in hours) to be taken into account

Threshold : It represents the system flaps threshold, once this value is overreached (within the Period parameter value), the system will be considered as “flapping system”

Launch the “Clear flapping data” feature, which will immediately clear all flapping system information stored so far