SAP JCO driver for NetWeaver and S/4HANA

The JCO driver is mandatory if you want to monitor ABAP stack systems

You can download it here: https://service.sap.com/connectors

Caution: You must use the driver for JAVA 64 bits

The driver is in a ZIP archive, do not extract it, it will be imported as it is.

From the admin menu, open “Admin configuration” and go in the “Upload/Download” section

Press the “Upload JCO library” button and select the archive

You will receive a confirmation once the driver is installed.

In case of upgrade: You must stop the monitoring few minutes before, otherwise current driver files could be locked.

It is always possible to upgrade the drivers manually:

Extract the sapjco3.jar and sapjco3.dll from the archive

Stop Pro.Monitor service and wait 5 minutes

Copy them in [Pro.Monitor install folder]\lib

Start Pro.Monitor

If the driver is not properly installed, ABAP connectors will appear with a FAILED status and an error message will indicate a driver error.

SAP HANA driver

The HANA driver is mandatory if you want to monitor HANA databases

The driver is a file named ngdbc.jar that you can find in the SAP HANA client installation.

The installation process is exactly the same than for JCO driver, except that you need to use “Upload HANA driver” button to install the driver

Upgrade and manual install procedure is the same than for JCO driver as well

If the driver is not properly installed, HANA connectors will appear with a FAILED status and an error message will indicate a driver error