==== SAP JCO driver for NetWeaver and S/4HANA ====

  * The JCO driver is mandatory if you want to monitor ABAP stack systems
  * You can download it here: https://service.sap.com/connectors
  * **Caution:** You must use the driver for JAVA 64 bits
  * The driver is in a ZIP archive, do not extract it, it will be imported as it is.
  * From the admin menu, open “Admin configuration” and go in the “Upload/Download” section
  * Press the “Upload JCO library” button and select the archive
  * You will receive a confirmation once the driver is installed.
  * In case of upgrade: You must stop the monitoring few minutes before, otherwise current driver files could be locked.
  * It is always possible to upgrade the drivers manually:
     * Extract the sapjco3.jar and sapjco3.dll from the archive
     * Stop Pro.Monitor service and wait 5 minutes
     * Copy them in [Pro.Monitor install folder]\lib
     * Start Pro.Monitor
  * If the driver is not properly installed, ABAP connectors will appear with a FAILED status and an error message will indicate a driver error.

==== SAP HANA driver ====
  * The HANA driver is mandatory if you want to monitor HANA databases
  * The driver is a file named ngdbc.jar that you can find in the SAP HANA client installation.
  * The installation process is exactly the same than for JCO driver, except that you need to use “Upload HANA driver” button to install the driver
  * Upgrade and manual install procedure is the same than for JCO driver as well
  * If the driver is not properly installed, HANA connectors will appear with a FAILED status and an error message will indicate a driver error

{{adminupload.png}}