===== System =====

==== Purpose ====
Pro.Monior allows administrators to fully configure a system with an specific functionality : System.
This feature is subdivided in the following sections (see image below) :  

=== System Setting ===
In this section, administrators can configure :
  * How many parallel tasks a given monitoring process will execute.
  * The allocation (in GB) of the monitoring processes memory.
  * Monitoring processes' timeout (in minutes)  
=== Retention setting ===
Under this section, administrators are able to : 
  * Activate / Deactivate the Moniors result Retention Pro.Monitor feature
  * Set the number of days that Pro.Monitor will store in memory monitoring test information
  * Set the number of days that Pro.Monitor will keep in memory the monitoring data
  * Configure the number of days Pro.Monitor log files will write information 
=== Timeout setting ===
In this section, administrators will be able to :
  * Set the timeout value (in seconds) for a report to be generated 
  * Configure the maximum connection invalid attempt time 
  * Set the maximum connection response time (in seconds)
  * Launch the "Cleanup Procedure", which will immediately clean all information stored as Tests, Monitor results and Log files retention.   
=== Flapping settings ===
Under this section, the administrator can determine :
  * When a given system is to be considered as a "flapping system" trough the folllowing parameters :  
    * Period : It represents the time lapse (in hours) to be taken into account 
    * Threshold : It represents the system flaps threshold, once this value is overreached (within the Period parameter value), the system will be considered as “flapping system”
  * Launch the "Clear flapping data" feature, which will immediately clear all flapping system information stored so far   


{{.:adminconfigurationsystems.png}}

{{.:adminconfigurationsystemsflapping.png}}