{{indexmenu_n>4}}
===== 4. Monitoring profiles =====

==== Monitoring profiles ====
  * The configuration of the monitoring is defined in the profiles
  * To monitor a system, simply assign profiles to its connectors
  * Default profiles are provided to facilitate the setup of the monitoring, you can visualize them via the menu PROFILES -> Select default profiles
  * These profiles contains monitors with a default configuration
  * To visualize the content of a profile, simply select one in the PROFILES section, this will display its current monitors (see image below - step 1 -)
  * Use the assign (see image below - step 2 -) button to associate a profile to one or several connectors. This will open a screen (see image below - step 3 -) where you will be able to move connectors from right to left and vice versa. The ones on the left will use the profile
  * You can also create empty profiles and defined exactly which monitors you want to activate

==== Profile customization ====
  * From a profile, you can press the EDIT button to open the list of available monitors (see image below - step 4 -)
  * On the right side are displayed the available monitors and on the left, the ones already used in the profile.
  * Simply move the monitors left and right to add and remove monitors.
  * Warning: If you remove a monitor from a profile, you will loose its customization, and it won’t be used against the assigned systems.

=== Step 1 ===
{{.:..:pasted:20180316-120317.png}}

=== Step 2 ===
{{.:..:pasted:20180316-120335.png}}

=== Step 3 ===
{{.:..:pasted:20180316-120354.png}}

=== Step 4 ===
{{.:..:pasted:20180316-120415.png}}