===== Monitoring profiles =====

==== Monitoring profiles ====
  * The ready-to-monitor configuration of all monitors is defined in the profiles
  * To monitor a system, simply assign profiles to its connectors
  * Default profiles are provided to facilitate the setup of the monitoring, you can visualize them via the menu PROFILES -> Select default profiles
  * These profiles contains monitors with a default configuration
  * To visualize the content of a profile, simply select one in the PROFILES section, this will display its current monitors 

{{:products:promonitor:6.7:userguide:configuration:pasted:20190225-151309.png}}

  * Use the assign button to associate a profile to one or several connectors.
  * This will open a screen where you will be able to move connectors from right to left and vice versa. 
  * The ones on the left will use the profile
  * **Notice that you can also create your own profiles and then define exactly which monitors you want to activate**

{{:products:promonitor:6.7:userguide:configuration:pasted:20190225-152021.png}}
\\
\\
{{:products:promonitor:6.7:userguide:configuration:pasted:20190225-152312.png}}

==== Profile customization ====
  * From a profile, you can press the EDIT button to open the list of available monitors (see image below - step 4 -)
  * On the right side are displayed the available monitors and on the left, the ones already used in the profile.
  * Simply move the monitors left and right to add and remove monitors.
  * Warning: If you remove a monitor from a profile, you will loose its customization, and it won’t be used against the assigned systems.




=== Step 4 ===
{{.:..:pasted:20180316-120415.png}}