Pro.Monior allows administrators to fully configure a system with an specific functionality : System. This feature is subdivided in the following sections (see image below) :

In this section, administrators can configure :

• How many parallel tasks a given monitoring process will execute.
• The allocation (in GB) of the monitoring processes memory.
• Monitoring processes' timeout (in minutes)

Under this section, administrators are able to :

• Activate / Deactivate the Moniors result Retention Pro.Monitor feature
• Set the number of days that Pro.Monitor will store in memory monitoring test information
• Set the number of days that Pro.Monitor will keep in memory the monitoring data
• Configure the number of days Pro.Monitor log files will write information

In this section, administrators will be able to :

• Set the timeout value (in seconds) for a report to be generated
• Configure the maximum connection invalid attempt time
• Set the maximum connection response time (in seconds)
• Launch the “Cleanup Procedure”, which will immediately clean all information stored as Tests, Monitor results and Log files retention.

Under this section, the administrator can determine :

• When a given system is to be considered as a “flapping system” trough the folllowing parameters :
  • Period : It represents the time lapse (in hours) to be taken into account
  • Threshold : It represents the system flaps threshold, once this value is overreached (within the Period parameter value), the system will be considered as “flapping system”
• Launch the “Clear flapping data” feature, which will immediately clear all flapping system information stored so far