SAP JCO driver for NetWeaver and S/4HANA
- The JCO driver is mandatory if you want to monitor ABAP stack systems
- You can download it here: https://service.sap.com/connectors
- Caution: You must use the driver for JAVA 64 bits
- The driver is in a ZIP archive, do not extract it, it will be imported as it is.
- From the admin menu, open “Admin configuration” and go in the “Upload/Download” section
- Press the “Upload JCO library” button and select the archive
- You will receive a confirmation once the driver is installed.
- In case of upgrade: You must stop the monitoring few minutes before, otherwise current driver files could be locked.
- It is always possible to upgrade the drivers manually:
- Extract the sapjco3.jar and sapjco3.dll from the archive
- Stop Pro.Monitor service and wait 5 minutes
- Copy them in [Pro.Monitor install folder]\lib
- Start Pro.Monitor
- If the driver is not properly installed, ABAP connectors will appear with a FAILED status and an error message will indicate a driver error.
SAP HANA driver
- The HANA driver is mandatory if you want to monitor HANA databases
- The driver is a file named ngdbc.jar that you can find in the SAP HANA client installation.
- The installation process is exactly the same than for JCO driver, except that you need to use “Upload HANA driver” button to install the driver
- Upgrade and manual install procedure is the same than for JCO driver as well
- If the driver is not properly installed, HANA connectors will appear with a FAILED status and an error message will indicate a driver error
