products:promonitor:6.8:userguide:administration:adminconfig:update

Update menu

Purpose

  • You can update server and agent application from the web interface.
  • This allows to update the application remotely without having access to the OS layer.
  • Remote agents attached to the server can be updated too with the uploaded package.
  • An OS updater is available if necessary.

From this menu you can:

  • Upload and install software updates
  • Configure update settings for agents

Update of Pro.Monitor server

  • Download the update package provided by Agentil Software (zip file)
  • Use the Import new version button to select the update file in your local file system and upload it.
  • Once uploaded the package will be listed in the table, showing its version
  • Press Install to start installing the update, wait for the confirmation screen acknowledging its success
  • To complete installation, you must restart Pro.Monitor. Go the Maintenance tab on the left and press Restart.

Note: The actual installation happens during restart. If you install an update without restarting, this will not affect the software in place.

Caution: Downgrading Pro.Monitor is not possible

Configuration for remote agents update

In the configuration panel, you can define the update settings for the remote agents:

  • Stop update if too many errors: If active, the agent update loop will stop automaticaly
  • Max update errors: The max number of errors before stoping the update loop
  • Max download failures: The max number of retries an agent can do for downloading a new package
  • Max install errors: The max number of retries an agent can do for installing a new package
  • Update mode: Define if all agent will update one after the other or all at once
/home/clients/8c48b436badcd3a0bdaaba8c59a54bf1/wiki-web/data/pages/products/promonitor/6.8/userguide/administration/adminconfig/update.txt · Last modified: 2023/07/14 13:04 by rbariou